| Features and main uses： | |||
| TC-141 is a kind of low viscosity, non pre promoted unsaturated polyester resin specially designed for transparent water white casting crafts. It has the characteristics of moderate exothermic and rapid curing. It can be used with accelerator RP-51 (or RP-126) to obtain the transparency similar to glass. | |||
| Technical index of liquid resin: | |||
| Project | Company | Index | Test Method |
| Appearance | ... | Transparent liquid | ... |
| Viscosity | Pa?s | L~N | B50200 |
| Chroma | ... | Less than 50 | B42300 |
| Gel time | min | 4.2~7.8 | C82601 |
| Note: gel time test:Resin 50g;Accelerator RC 1.0ml;Curing agent Butanox M-50 1.0g | |||
| Physical properties of casting body: | |||
| Project | Company | Measured value | Test Method |
| Tensile strength | MPa | 69.3 | GB/T2567-2008 |
| Tensile modulus of elasticity | MPa | 3380 | GB/T2567-2008 |
| Breaking extensibility | ... | 3.12% | GB/T2567-2008 |
| Bending strength | MPa | 128 | GB/T2567-2008 |
| Breaking extensibility | MPa | 3330 | GB/T2567-2008 |
| Impact strength | KJ/m2 | 13.2 | GB/T2567-2008 |
| Hot deformation temperature | ℃ | 58 | GB/T1634-2004 |
| Barcol hardness | ... | 40 | GB/T3854-2005 |
| Note: 1. The preparation method is in accordance with GB / T8237-2005, curing system: Accelerator RC 1.0%, Curing agent MEKP 1.0%. | |||
| 2. Casting body post-treatment: room temperature×24 hours + 60 ℃×3 hours + 80 ℃×1 hours. | |||
| Reference formula： | |||
| TC-141 resin 100 copies；Curing agent MEKPO 0.3~0.5 copies；Accelerator RP-51（RP-126） 0.3~0.5 copies；Gel time（25℃）40~60minutes | |||
| Matters needing attention: | |||
| 1. Different production processes and formulations have an impact on the color and transparency of the resin, so before using a large number of resins, several samples should be made to determine the color and transparency of the resin. | |||
| 2. The product should be stored in a cool place below 25 ℃ to avoid fire and keep away from heat and radiation sources. The shelf life of products stored below 25 ℃ is 3 months. | |||
|
In view of the diversity of application conditions, it is necessary for users to confirm the product performance. If you have any questions about the contents of this information or want to know more information, please contact our company. We reserve the right to modify the data. |
|||
