Product features:

1. Excellent electrical insulation, arc resistance and leakage trace resistance.

2. Excellent mechanical strength, flame retardant and heat resistance.

3. Excellent molding process, low molding pressure and short molding time.

4. Good colorability, BMC of various colors can be prepared according to the needs

BMC molding compound is the abbreviation of "bulk molding compound" in English. It uses unsaturated polyester resin of different specifications as adhesive, alkali-free glass fiber as reinforcement material, and adds fillers and various additives to produce various types of BMC through professional equipment processing. It has excellent comprehensive performance and convenient molding and processing.

Scope of application: it is widely used in electrical engineering, construction, civil electrical appliances, daily necessities and other industries, used to process all kinds of isolated parts, structural parts, decorative parts and daily necessities.

Other notes: Notes

1. The surface of mould cavity should be plated with hard chromium.

2. When feeding, the BMC is rubbed into a ball shape and added to the center of the cavity. The area is 50-80% of the projected area of the product.

3. The molding pressure should not be too high. Too high pressure will bring the defects such as mucous membrane, inconvenient ejection, glass fiber surface and no luster.

4. After use, the material should be tightly tied and sealed.

5. The materials should be stored in the shade below 25 ℃ for three months.

Preparation of BMC molding compound

BMC products are composed of liquid up resin, solid powder filler, chopped glass fiber and other components. In order to facilitate the feeding operation during molding, the premix is usually extruded into strips or pellets.

The preparation of BMC products is divided into two steps: firstly, the resin, initiator, colorant, release agent and some fillers are added into the high shear mixer to mix evenly, and the mixing temperature reaches about 50 ℃. Then, the remaining fillers are slowly added to mix and mix evenly to prepare the resin premixed slurry; ② Add the premixed slurry into the z-reamer mixer or planetary mixer, add the dried chopped glass fiber, mix for 10-15 minutes, pour out the dough, extrude into strip and pellet shape by extruder, seal and pack with polyester film after drying, and store for standby.